首頁 > FAQ
FAQ | AIR inspection report
AIR SGS inspection report
| Test Item | Unit | 測定值 | 規範值 | 備註 |
| Color Difference (Delta E)0 | ΔE | 0.92 | 1-2.5 | When ΔE < 1, the human eye cannot perceive the color change |
| Water Absorption Rate (%) | % | 0.47 | Below10 | Materials with low water absorption better prevent moisture penetration and protect the structure from damage |
| Water Absorption Thickness Swelling Rate (%) | % | 0 | Below 3 | Excessive swelling may cause the material to expand in volume, affecting its shape and structural stability |
| Compressive Test | kgf | 6000kgf | Above 3000 | Higher values indicate greater durability and safety. |
| Flame Retardant Test | 5VA | Above 5VB | Rating order V0 < V1 < V0 < 5VB < 5VA (5VA is the highest level) | |
| Slip Resistance Coefficient | - | 0.64 | Above 0.6 | Above 0.6 is considered very safe |
| Abrasion Resistance Test | g | 0.5 | Below 1 | Abrasion loss less than 1 g means the product surface is more scratch‑ and wear‑resistant, leading to better durability. |
| Eight Heavy Metals | n.d (Not Detected) | Not Detectable | The eight heavy metals are Cadmium (Cd), Chromium (Cr), Lead (Pb), Mercury (Hg), Nickel (Ni), Copper (Cu), Zinc (Zn), and Antimony (Sb). |